| -L. |
Is it structurally possible to make a double layer sheet cake from two
9X13 cakes? Any tips on how to transfer the second layer without it
falling apart in the process?
TIA!
-L.
|
|
|
| chembake |
One of the easy way is to cut one layer in vertically in half and place
it two pieces instead of one. Anyway when assembled and frosted it
will look like one<grin>.
|
|
|
| Vox Humana |
"-L." <gentleboa@peacemail.com> wrote in message
news:1135584716.883031.169580@g14g2000cwa.googlegroups.com...
> Is it structurally possible to make a double layer sheet cake from two
> 9X13 cakes? Any tips on how to transfer the second layer without it
> falling apart in the process?
Yes, it is possible. I place the top cake on a cardboard cake board or a
rimless cookie sheet. Position the cake where you want it and slide the
board out from under the cake.
|
|
|
| King's Crown |
I cut a 9X13 horizontally and fill with frosting. I used the cooling rack
and slid the top half back on. I slid one edge to over lap the cooling
rack. Touched it down on the frosted cake then slid the rack out while
lightly holding the edge that was touch down and it went on perfectly.
Lynne
"-L." <gentleboa@peacemail.com> wrote in message
news:1135584716.883031.169580@g14g2000cwa.googlegroups.com...
> Is it structurally possible to make a double layer sheet cake from two
> 9X13 cakes? Any tips on how to transfer the second layer without it
> falling apart in the process?
>
> TIA!
> -L.
>
|
|
|
|
